Instant Glue




SanaBond® is an adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.


- High bonding strength.

- Suitable for use on vertical surfaces as it will not drip or slump.

- It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.


- It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.

- Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.

- Especially suitable for the applications where cure speed needs to be accelerated.

- Although SanaBond® has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.


Substrates need to be smooth and have a perfect connection area. Apply a drop on one of the substrates. Join substrates and press firmly for one minute. Application temperature is between +41°F and +95°F.


Product Weight/Volume Package
SanaBond® 100ml. 25gr. Cyan., + 100ml. Act. 72 Kits
SanaBond® 200ml. 50gr. Cyan., + 200ml. Act. 50 Kits
SanaBond® 400ml. 100gr. Cyan., + 400ml. Act. 25 Kits


12 months in unopened packaging in a dry and cool storage place at temperatures between +41°F and +95°F.


- Cyanoacrylates should ideally be stored in original sealed containers until used.

- Avoid exposure to strong light and heat sources

- Cyanoacrylates can bond to skin within seconds

- Do not drip into skin or into eyes - can cause serious injury to your eyes.

- Will become hard in container if not closed properly!

- Activator is flammable. Do not throw into fire. Do not inhale.

- Activator box is pressured. Do not crush or drill.